MATLAB XPC TARGET 4 - IO Manuel d'utilisateur télécharger pdf (Page 27)

Form Factors

Each of the PC-compatible form factors presented in the following sections has advantages and

disadvantages. You should carefully read through all the descriptions before making your selection.

Information about the performance and I/O expendability is also given in these sections. This chapter

includes the following sections:

Desktop PC (p. 2-2) Select the desktop PC for a clean, climate-controlled

environment with no space limitations, no vibration or

mechanical shocks, and an electrical environment with

minimal EMI such as an office or laboratory.

Rack-Mount or Industrial PC (p. 2-5) Select the industrial PC system for a standardized

industrial chassis (19'', 4U, 6U) and a passive or active

backplane with up to twenty ISA and PCI bus slots.

CompactPCI (p. 2-9) Select the CompactPCI for an adaptation of the PCI

specification for industrial computer applications

requiring a smaller, more robust mechanical form factor.

PC/104 and PC/104+ (p. 2-14) Select the PC/104 and PC/104+ for a PC-compatible

computer designed especially for embedded applications.

All-In-One Embedded PC (p. 2-19) Select the all-in-one embedded PC computer form factor

for a system that is very similar to PC/104, but which

overcomes the lack of a standardized chassis and

enclosure.

Laptop PC (p. 2-22) Do not select the laptop PC as the target PC platform for

the listed reasons.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

Pas de commentaire

MATLAB XPC TARGET 4 - IO Manuel d'utilisateur Page 27